PALBASE - EQUIPAMENTOS INDUSTRIAIS, LDA

Possuímos soluções para instalações de materiais altamente contaminados, incluindo equipamentos para separação por densidades, lavagem e baixo teor de humidade da matéria-prima final.

During the grinding process, the hydraulic ram presses the material against the rotor. The rotor is equipped with blades suitably designed for the materials to be recycled. The product's particle size is determined by the dimension of the sieve holes. The belt drive and the reaction system, absorb shocks during the grinding process, thereby protecting the mechanical elements of the shredder. The forward movement of the piston against the rotor is controlled by the consumption of the motor. Each material to be processed, depending on its makeup, may require a suitable program.

This range of shredders is used for recycling of pipes and thick, large-section profiles. The materials to be recycled are fed in via a loading tunnel with a safety cover. The profiles are hydraulically pressed against the rotor, and the movement of the ram is controlled by the motor's consumption. The design of the blades, rotor and infeed system, have been optimized to obtain a high-density end product, thanks to the large thickness of shredded material that is obtained.

The double shaft shredder allows the processing of a wide variety of materials, dimensions and densities, being suitable for the reduction of bulky products. It is equipped with a large hopper and two shafts, which support the cutting discs, being driven by two independent gear motors. The cutting discs are manufactured in high quality steel and wear resistant. The reduced speed of rotation allows low energy consumption and noise level. The inversion system allows to, in case of excessive load, is automatically activated the temporary inversion of the rotors movement in order to avoid the overloading. As an option, an upper ram can be mounted for processing of bulky parts (bumpers, containers, etc.). The main applications are: - plastic materials - rubber / tires - paper / cardboard - wood - cables

The XRT range, designed for general applications, is used as a central granulator or beside the press. Its sturdiness ensures a long life in recycling plastic materials obtained by injection, blow molding and extrusion. The scissor cutting system reduces the production of dust as well as energy consumption. A jig for adjustment of the knives outside the granulator ensures precision in the gap between knives, while allowing them to be quickly and easily replaced. A wide range of options makes this series of granulator very versatile.

Vertical mixers (often referred to as fountain mixers) have an internal vertical screw conveying the material from bottom to the top, promoting to the mix. This design is also suitable for storage of poor flow materials, to prevent hang-up and bridging problems. The mixers are provided with large doors for easy cleaning. Produced in mild steel or stainless steel, can be supplied with several options like feeding screws, heating device, level sensors and to on.

The guillotines are used for size reduction of products to enable feeding to grinding equipments. Typical applications are: rolls of film, purges, bales, etc. A range of accessories equipments, like the loading and unloading belts conveyors, complement recycling systems.

Transportadores de tela para a indústria dos plásticos e reciclagem.